King's ART Auto-Restoration Agent

Energy saving, gas emission reduction,engine service life extending

King's ART Auto-Restoration Agent for Automobile Engine

l       Pressures in all cylinders will be homogeneous and identical, and be very close to the specification required value.

l       The oil pressure under idling at 2,000 rpm will increase to the value when the engine is normally operating.

l       Consumption of fuels is lowered by over 5%

l       As for concentrations of exhaust emission, CO will decrease by about 50%, HC by over 30%, NOx by at least 20% for gasoline engine, and diesel smoke by at least 30%

l       The period of lubrication oil change will be extended by at least 3 times.

The Main Characteristics of the Product

1. Selective In-situ Generation of Protective Layer

   Kings ART products are characterized by selectively reconditioning worn parts in terms of different wear degrees, which is unattainable by ordinary lubricant additives and other anti-wear products.

2. Super Lubricity

   The protective layer generated is extremely smooth surface of nano-crystalline with a friction coefficient less than 0.01 which is one order less than that of the oil film.

3. High Hardness

   The high ceramic surface hardness is 2-3 times higher than substrate, and the bonding strength with substrate, fatigue strength, wear resistance, lubricity and corrosion resistance are all superior to any kind of traditional surface treatment.

4. On-line Maintenance

Kings ART Technology can auto-recondition worn parts while equipment is still operating therefore play special role in the repair and maintenance link, realize lowering maintenance cost, increasing usage efficiency and prolonging service life.

5. Good Compatibility

At normal temperature and pressure, the products neither react with oil and lubricant nor change the physi-chemical properties of carrier, and are compatible with all qualified lubricant in market.

6. Wide Application

Kings ART products are applicable to any friction pair with ferrous metal surface attaining to certain line speed, such as cylinder/piston, plain bearing and rolling bearing, gear transmission, chain and so on. It can also be applied in newly-prepared parts to get desired surface with excellent mechanical property and lower cost.

7. Easy Operation

The procedure is very simple and no special equipment is needed with a wide application temperature of -60-50.

King's ART Auto-Restoration Agent